Everything you need to get started with a drip irrigation system for your garden. This kit includes several emitters, connectors, manifolds, and stakes. The only thing not included is the ¼" tubing needed to connect it all together. The emitters are threaded and can be adjusted. They might leak a little from the threads, but even the ones i've purchased do that.

I've used these with my greenhouse irrigation system that uses ½" pvc pipe for the main distribution line, which is connected to a sump pump. The pump is connected to a timer so that the plants get watered every morning. And it's all solar powered!

Whats Included

• 4 different emitter types - Emitter profile
  • 360° stream emitter
  • 180° stream emitter
  • Bubbler emitter
  • Mist emitter
• 2 emitter base - Emitter profile
  • 1 terminal base
  • 1 inline base
• 2 different stake types - Emitter profile
  • 1 with a shelf to better keep emitters facing up
  • 1 without a shelf
• 3 connectors - Connector profile
  • T connector
  • Elbow connector
  • Straight connector
• 2 manifolds - ½" riser/pvc to ¼" tubing - Manifold profile
  • 4 out
  • 8 out
• 4 Splitters for ¼" tubing - Splitter profile
  • 1 to 2
  • 1 to 4
  • 1 to 6
  • 1 to 8

Profiles

All plates are labeled. PETG is recommended due to UV resistance, but PLA should be fine for a season. Elephants feet are added to most models to help with first layer adhesion.

• Emitters
• Connectors
• Manifolds
• Splitters