Hi, 

    This is my Counting Coil Winder. I needed to make some coils for an experiment so I came up with this. There are three counting gears three linking gears and the main drive gear. The main drive gear is rotated by cranking the crank handle. It will work on the base or you can just grab it in a vice for stability. I added in one of my coil forms so you can use it or adapt it to the coil shape you are after.  I will add a reel of it to my insta shortly.

[https://www.instagram.com/reel/DJHwLvCCc_1/?igsh=aXJxbHVlMDR1ZDUy](https://www.instagram.com/reel/DJHwLvCCc_1/?igsh=aXJxbHVlMDR1ZDUy)

Happy coiling!

Purchaced components:

2 x M10 shouldered bolts 75mm

10mm radial bearing 8mm thick

2 x 10mm thrust bearings

M10 washers x 2

M10 repair washer 38mm

6 x M4 x 10mm 

2 x M4 x 18mm