This simple platform sits behind your sink and gives your spray bottles a better place to stay — slightly raised, angled toward the basin, and with an open edge that lets excess water flow safely back into the sink. I got tired of all the splashing and puddles behind the sink, so I designed this to keep things tidier.

The design comes in two sizes (170 mm and 240 mm wide), so you can match it to your sink setup. You can use just one guard or print two to fully cover the back of your sink — with water draining down the center.

If you'd prefer the water to flow in the opposite direction, you can mirror the model. In Bambu Studio, go to the Prepare tab, right-click the object and select Mirror from the menu.

This model is available in:

• Standard size (240 mm wide)
• Compact version (170 mm wide, A1 mini compatible)

Recommended filament:
Bambu PLA Basic — works well for smooth top surfaces and flat supports

PolyMaker PolyTerra PLA — also tested and worked well

Printer I tested on: Bambu Lab P1S

Hotend: 0.4 mm Stainless Steel

Print time:
~2h 50min (standard version)
~2h 15min (A1 mini version)

Hope it comes in handy!

💧✨