roject: david nomo.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x130.52mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Basic Green Transmission Distance: 2
    PLA BambuLab Basic Brown Transmission Distance: 2
    PLA BambuLab Basic Red Transmission Distance: 5
    PLA BambuLab Basic BambuLab Green Transmission Distance: 4
    PLA BambuLab Basic Beige Transmission Distance: 8
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Green
    At layer #7 (0.64mm) swap to Brown
    At layer #9 (0.8mm) swap to Red
    At layer #12 (1.04mm) swap to BambuLab Green
    At layer #17 (1.44mm) swap to Beige
    At layer #23 (1.92mm) swap to Jade White for the rest.