Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.52mm
The Max allowed Thickness is 2.28mm and the Actual Thickness is 2.28mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.84mm) swap to Blue Gray
    At layer #15 (1.32mm) swap to Blue
    At layer #20 (1.72mm) swap to Yellow for the rest.