📦 Model Description
These are some modifications to upgrade a printer enclosure available on Amazon: product link.

Originally, the frame was a bit unstable, so I redesigned the connectors and the corner pieces, making them stronger.
I also added a hole to the corners to allow tying a rope (a simple string works just fine), improving the overall stability, taking inspiration from tensile structures.
I also designed a small rope tensioner: you don't need to pull it too hard, but it helps a lot to stiffen the frame.

🧩 Corners
The corners require a small amount of support due to the design.
In my first version, they were more optimized for printing, but they used more material without any real advantage, so I preferred to slim down the design to save filament.
The joints are quite tight to improve stability—don't worry if they are a bit hard to insert!

🪢 Tensioner
The tensioner prints in one single piece. Due to its shape, there will be a bit of bridging inside the rope hole.
⚠️ Warning!

This kind of tensioner does not allow you to loosen the rope easily. I suggest making a simple knot on at least one side so you can remove it later if needed, otherwise, you will have to cut the rope.

🔑 Allen Key
The tool to tighten the tensioner is a standard 8 mm Allen key.
I included a printable version just in case, but if you already have one, there's no need to print it.

🖨 Print Tips
The included print profile is the same I used myself.
If you want to improve the result in the bridging areas, you can increase the fan speed during printing.

• For printers other than Bambulab:
  • You might need to use supports even inside the holes.
  • Also, the tensioner is quite a tricky part and may not work properly on printers with different tolerances—you might need to tweak your settings slightly.

💬 Share with me!
If you have any suggestions, ideas, or just want to say hi, feel free to leave a comment!
I always enjoy reading your feedback, discovering new ideas, and seeing how you customize my designs.

And if you print one of my models, please upload a photo of your result!
It really helps me understand how my designs are used and how I can keep improving them to make them even more versatile and functional.