Yellow Components

3D-print in yellow colour.

Silver Components

3D-print in silver or white colour.

Black Components

3D-print in black colour.

Superglue

Step 1

Place the yellow buttons into their matching cutouts on the console body

Step 2

Place the black screen into its hole.

Then, insert the silver speaker grill into its cutout, followed by the black speaker piece on top.

Hopefully, these pieces will stay in their place with friction. If they're loose, just use a tiny bit of superglue.

Step 3

Place the silver power button into the cutout on the other half of the console body.

Step 4

Assemble the crank!

Use superglue on the 2 large pieces to lock everything in place - but make sure not to get any superglue on the handle or insert!

The handle and insert should both be able to rotate freely.

Step 5

Insert the assembled crank into its slot on the bottom half of the body. Then, place the top half of the body on top.

Ensure that the pieces fit together nicely and that the crank is able to spin freely.

Then, superglue the two halves together - make sure not to get any superglue on the crank! (Alternatively, you can use M3 screws)

Step 6

Insert the screw caps into their slots on the front and back.

Step 7

C̷̨̙̮̲͖̲̘̄͋̏͒̌͂̉Ŗ̵̉̀̍͝A̷͉͍̼̤̱͋̑͑͒͒͜͝N̷̬̋̀̃K̷̨̜̘͍̇̕ͅ