I had a need for a traveling pillbox, but for large and numerous pills. I couldn't find anything that was quite what I liked or printed how I wanted , so I designed this guy. It's a simple pillbox with a magnetic closure. It has 3 compartments measuring 30x35x20mm. It has spaces for 2 10x3mm disk magnets to be glued into place. These apply enough force to keep the case closed but are easy enough to open.

The inner case is oriented at a 45 degree angle on the print bed and has a brim and support to keep it in place. The main reason for this orientation is to provide clean layer lines with little to no support scaring. I do not recommend changing this orientation.

I left the outer sleeve plain to allow you plenty of surface area to emboss anything you may want to.

To glue in the magnets simply apply adhesive to the inside of the depression on the inner case and press in 2 magnets. Only one magnet will fit. Now apply glue to the second magnet and slide the outer case over the top. Press the two together slightly and let it sit for as long as your chosen adhesive requires. I used super glue and by the time I had cleaned up my work space I was able to separate the two halves and the magnets stayed in place.

I have tested this guy for about a month before releasing the files and have had no instances of it opening in my travel bag. Hopefully you enjoy and it's as useful for you as it has been for me!