Red Panda bookmark 154mm x 51mm
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 51x154mm in size

If you wish to scale please do not change z height!

You may print at higher layer heights below the Base Thickness of 0.16mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.08mm

Filaments Used:
    #000000 PLA Kingroon Black  Transmission Distance: 0.1
    #555856 PLA Kingroon Gray  Transmission Distance: 2.2
    #ff6a13 PLA Bambu orange  Transmission Distance: 5.2
    #ffffff PLA sunlu white  Transmission Distance: 6.8
This print uses 4 unique filaments

Swap Instructions:
    Start with Kingroon Black
    At layer #6 (0.56mm) swap to Kingroon Gray
    At layer #14 (1.2mm) swap to Bambu orange
    At layer #17 (1.44mm) swap to sunlu white for the rest.