Summary - My first ever hueforge. Slowed settings for quality feel free to edit speed settings. Do NOT adjust the Z axis when re-sizing.

HueForge technobabble:
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm

The Model is 200.78x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Matte Ivory White Transmission Distance: 3.5
    PLA PolyLite Black Transmission Distance: 0.5
    PLA BambuLab Basic Maroon Red Transmission Distance: 1.5
    PLA BambuLab Matte Dark Red Transmission Distance: 1.5
    PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
This print uses 5 unique filaments

Swap Instructions:
    Start with Ivory White
    At layer #17 (0.76mm) swap to Black
    At layer #32 (1.36mm) swap to Maroon Red
    At layer #36 (1.52mm) swap to Dark Red
    At layer #44 (1.84mm) swap to Lemon Yellow for the rest.

Sorry for the warped print in the picture. I have yet to re-print it yet, I will update it when I get around to it. Your print should work if you cleaned your buildplate I uh, didn't.