Bob Marley Fan Art

I used Bambu Basic Black, Orange, Yellow and Jade White

File is set at 200mm x 200mm but can be changed, do not change the height (Z axis). Colors can be changed to suit your needs.

We have added a non commercial tier to our patreon. For your $5 monthly donation you get access to our 100+ file library for free. No rights to sell the prints in this one but there are a few discounted spots for early birds to the Pro tier, act soon if you would like all my files for free with rights to sell them.

patreon.com/TheMadFabricator

The files cannot be sold, shared or transferred in any way ever.

Project: Marley blk org yel wht.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 1.1mm
The Max Depth is 2.5mm and the Actual Depth is 2.5mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Orange Transmission Distance: 5
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #16 (1.36mm) swap to Orange
    At layer #20 (1.68mm) swap to Yellow
    At layer #23 (1.92mm) swap to Jade White for the rest.