Project: Mano (Angel & Demonio) 5c.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 141x200mm in size
 

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA esFIL PLA 850 Red Transmission Distance: 5
    PLA Jayo PLA Gray Transmission Distance: 4
    PLA SOLEYIN ULTRA PLA White Transmission Distance: 3.5
    PLA mio Gold Transmission Distance: 5.2

Swap Instructions for 4 colours print (maybe 3 colours):
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #16 (1.36mm) swap to White
    At layer #24 (2mm) swap to Gold for the rest. (you can use red filament again in this step if you want the halo in red colour as i made in the example photo)

Swap Instructions for 5 colours print: (adds some shadows with grey filament)
    Start with Black
    At layer #9 (0.8mm) swap to Red
    At layer #14 (1.2mm) swap to Gray
    At layer #18 (1.36mm) swap to White
    At layer #22 (1.76mm) swap to Gold for the rest.