Customizable self watering sphere.

With this device, you can create an irrigation system that will provide your plants with water for a long time. The model allows for a wide variety of settings, so the only limit is your imagination.

You can set the folowing parameters:
outer_radius
wall_thickness
hole_diameter
hole_angle
fn = 128 (Recommend 128, it is resolution of sphere)

cone_length
cone_wall_thickness
cone_radius_base
cone_radius_tip

Use a very clean plate because the adhesion will not be adequate and I recommend using a plate with good adhesion such as textured PEI or PEI plate.

My modells: my modells.

My Customizable modells: click

If you are satisfied with my work, please, in addition to downloading the model, printing and evaluating it, you can also support it with boost.

Print, use and enjoy!