Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 56.82x152.5mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #9d432c PLA BambuLab Basic Brown  Transmission Distance: 2
    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.5
 

This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Brown
    At layer #11 (0.96mm) swap to Mandarin Orange
    At layer #14 (1.2mm) swap to Yellow
    At layer #19 (1.6mm) swap to Ivory White for the rest.