Silver Surfer Hueforge

🛑PLEASE DRY YOUR FILAMENT BEFORE HAND TO PREVENT STRINGING🛑

🛑STRICTLY FOLLOW FILAMENT MANUFACTURER SETTINGS TO PREVENT STRINGING🛑

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 240x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA Black Transmission Distance: 0.3
    PLA Grey Transmission Distance: 1
    PLA White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.72mm) swap to Grey
    At layer #7 (1.12mm) swap to White

You can increase/decrease the swap heights for less stars and different colored stars:

I am not the original artist nor do I know who they are, hence this model free to be shared. If you are the original artist, please contact me.

Descrição