♟️ GridFold Portable Chess Set

Includes:

• Magnetic closure (link for magnets below)
• Print-in-place hinge
• Minimal setup
• Custom-designed chess pieces
• Magnetic stands
• 200x200mm foldable chess board

🧲 Magnet Info:

This set uses strong 3x2mm magnets. You only need 8 total, even though the link below may show a larger quantity (e.g., 400 pcs).
➡️ Link for Magnet
Tip: To close the box securely, fit the chess pieces inside, leave the box slightly open, and shake gently while slowly pressing down to engage the magnets.
Important: Ensure no chess pieces are upright when closing.

🛠️ Assembly Instructions:

• Glue one magnet into each notch on the sides of the chess board.
• Be sure opposite sides have opposite polarity so they attract properly.
• Do the same for the stands—glue magnets in, matching polarity with the board to ensure a stable connection.

ℹ️ Notes & Tips:

• If you're not using a Bambu P1S, switch the printer setting to your own model.
• If you're not using a Textured Plate, update your build plate setting accordingly.
• Clean the print bed thoroughly with gentle soap before printing for best adhesion.
• Want to use different chess pieces? Each checkered square measures 25x25mm.
• Don't increase the infill on chess pieces—they're designed to be light, and extra weight could force the box open.
• I printed the “black” pieces in blue as I did not have a enough filament, sorry.
• Big thanks to @Staubi for help with checkered coloring in Bambu Studio!