Hello,

UPDATE 26/1/2024:

You can check you our new model, same like this one but XL bigger. Inner containers are compatible.

[https://makerworld.com/en/models/157759#profileId-173134](https://makerworld.com/en/models/157759#profileId-173134)

UPDATE 19/1/2024:

You can check you our new model, same like this one but smaller. Inner containers are compatible.

[https://makerworld.com/en/models/146935#profileId-160286](https://makerworld.com/en/models/146935#profileId-160286)

My new model of the utility case.

Simple print without support

All parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.

To assemble it, you need:

6pcs M3 nuts

2 pcs of screws M3x30

3pcs of screws M3x18

Dimensions are in mm:

NEW:

Now we made V2 model that has thicker hinges on each side by 1mm behind, and wall loops with 3pcs.
For this model, instead of 3pcs M3x18mm screws, you now need 3pcs M3x20mm.

Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio.

Enjoy printing and using this useful case.