Looking for a solid solution to storing odds and ends in an easy way? Look no further! These are stackable cases that require no supports, and are strong and durable due to the thick outer walls and base. With full, half, and quarter sections, you can design it as you see fit for your needs. 

The large box takes about 3.5 hours to print, with the quarter boxes being the longest print of about 4.5 hours. You may not find the need to have four quarter boxes, and perhaps want 1 half and 2 quarters. Print as needed and reposition/create new build plates for how you want your storage containers to stack! There is also an optional top lid that sits nicely in the top case, if you would like to cover what is inside.

Measurements:

• Full Container: 252mm long, 70.5mm tall, 127mm wide
• Divider: 249.5mm long, 64mm tall, 1.25mm wide
• Half Container: 126mm long, 70.5mm tall, 127mm wide
• Quarter Container: 63.5mm long, 70.5mm tall, 127mm wide
• Lid: 250mm long, 125mm wide, 6.35mm tall

Print settings:

• 15% Gyroid Infill
• 4 wall loops
• Top Surface pattern is Rectilinear
• Bottom surface pattern is Rectilinear
• Internal Top/Bottom pattern is Rectilinear 

These containers are durable, and not thin or in vase mode. This is partly why it takes a bit longer to print, but worth it for reassurance that your items will be safe inside. 

I hope these containers and optional configuration are as useful for you as they have been for me. Happy printing, and if you enjoyed this model, please feel free to boost me so I can continue making more designs for the community! Thank you :)