Please do not scale the height of this design

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.5mm and the Actual Depth is 2.5mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
    PLA BambuLab Basic Jade White Transmission Distance: 8
    PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Ice Blue
    At layer #13 (1.12mm) swap to Jade White
    At layer #16 (1.36mm) swap to Red
    At layer #20 (1.68mm) swap to Jade White for the rest.