Introducing The Ring Collection Pt. 3

This is the third set of 12 Rings. Together with Parts 1&2 their are 36 Rings total.

Find Part 1 here: [https://makerworld.com/en/models/901382#profileId-860469](https://makerworld.com/en/models/901382#profileId-860469)

Find Part 2 here: [https://makerworld.com/en/models/946230#profileId-913064](https://makerworld.com/en/models/946230#profileId-913064)

All rings Available in US sizes 5 - 15.

Sizing

If you don't know your size, or if you don't use the US sizing system,  I recommend you print a measuring set. Like this one:

[https://makerworld.com/en/models/548369-ring-size-measuring-set-for-us-eu-uk-fr-d#profileId-466517](https://makerworld.com/en/models/548369-ring-size-measuring-set-for-us-eu-uk-fr-d#profileId-466517)

US Size | Inner Diameter (mm)

5            | 15.7 mm

6            | 16.5 mm

7            | 17.3 mm

8            | 18.1 mm

9            | 19.0 mm

10          | 19.8 mm

11          | 20.6 mm

12          | 21.4 mm

13          | 22.2 mm

14          | 23 mm

15          | 23.8 mm

Printing

• Print Profiles contain all sizes and are pre-colored.
• Create your own colorway by matching different filament to each color group.
• Use your fanciest or shiniest filaments for best results (I recommend PLA Silk Dual Color).
• All rings use the AMS for multicolor.
• Rings are designed to be printed at a 0.2mm layer height with a 0.4mm nozzle.
• 0.2mm nozzle not needed, but may give better results at the expense of time.
• Printing times range from 20 minutes - 2.25 hours (0.2mm layer height with a 0.4mm nozzle).
• Rings may run tight due to interior roughness and print tolerances, be prepared to sand the inside or go up a size.

Please share your Colorways!