Hello everyone, today I bring you this lightbox made with the same drawing that I used for the "Pika-Clicker".

Yes, I know, my led are sh*t …. but if someone of you wants to take a picture with decent leds and put it in the comments it will be really appreciated

In the photos the tail is poorly lit because of the terrible LEDs, the tail has enough space for the LEDs and the yellow part has the same transparency as the rest of the body.

I noticed that Pikachu's tail is heavy so it tends to fall to the left so I made a small base that will support the tail, you can find it in plate N4

- The front part of the lightbox (where the drawing is) is 1mm thick (0.8 color and 0.2 with a white layer)
- The thickness of the lightbox is about 4.3cm, I left some space so as not to have to put the leds too close to the drawing on the inside but if you don't like it too high or want to save material just cut it in the slice (don't resize it, cut it)
- The back panel has a 2cm hole to pass the leds or any cable you want to use, in the .3mf file it is also available without a hole in case you want to make the hole yourself in the slicer

I hope you like it, see you next time