This Benchy with a turret is printed entirely as a print-in-place model and is fully movable straight off the print bed – perfect as a tolerance test for your printer

A big thank you to the original creator of the 3DBenchy! Check out the original model here:
[https://makerworld.com/en/models/1272656-original-3dbenchy-public-domain-cad-step-file#profileId-1336828](https://makerworld.com/en/models/1272656-original-3dbenchy-public-domain-cad-step-file#profileId-1336828)

🛠️ Tolerance Information

🔧 Gap between parts:
The clearance between the rotating element and the Benchy is 0.26 mm.

📏 Typical spacing for Print-in-Place models:
I usually design with a gap of 0.2 mm to 0.26 mm between moving parts.
This spacing ensures the components can rotate and move freely after printing, without needing post-processing.

⚙️ Why this spacing?
Over time, I’ve adopted this range because I mostly use the default slicer settings! and it consistently works well for me. 😄

If your turret Benchy does not move freely after printing, I recommend performing a flow rate calibration first.
Here’s a helpful wiki article on how to do it:

[https://wiki.bambulab.com/en/software/bambu-studio/calibration_flow_rate](https://wiki.bambulab.com/en/software/bambu-studio/calibration_flow_rate)



If anyone’s looking for a good alternative, here’s my suggestion.

[https://makerworld.com/en/models/1302091-benchy-warship-with-moving-turrets-compact#profileId-1334663](https://makerworld.com/en/models/1302091-benchy-warship-with-moving-turrets-compact#profileId-1334663)

And for all who want to take their benchy in the bath 😄

[https://makerworld.com/en/models/1309792-benchy-floater#profileId-1343848](https://makerworld.com/en/models/1309792-benchy-floater#profileId-1343848)

If you have any questions, please write to me 👍😄


 

• Explore my tools:
• Caliper: Amazon Link
• Tool Kit: Amazon Link
• Soldering Mat: Amazon Link
• Cutting Mat Set: Amazon Link
• Disposable Gloves: Amazon Link
• 4L Storage Containers 6 Set: Amazon Link
• spring clamps - Amazon link.
   
• Graphics Tablet with Display: Amazon Link
• Graphics Tablet: Amazon Link
  
  
  Your feedback and support mean a lot to me. To stay updated and see more content, don't forget to follow: My YouTube Channel. If you’d like to support my work further, you can do so here: Patreon.