drift · lamp

modern minimalist table lamp, designed with a modular assembly approach for both style and functionality.

Assembly is simple and intuitive:

1. Thread the power cable through the lamp body, allowing the plug to exit from the bottom.
2. Secure the light socket fixture into the connector.
3. Twist-lock the connector into the lamp body for a snug fit.
4. Routie the power cable through the channel
5. Finally, place the shade over the connector, where it rests securely within the top lip.

This modular design not only makes assembly effortless but also offers versatility and a clean aesthetic perfect for any modern interior. It includes two connector options, for either a 30mm or 40mm inner diameter

components dimensions:

• lamp ~ x:161 · y:161 · z:156
• connectors ~ x:199 · y:199 · z:5
• shade ~ x:219 · y:219 · z:120

photos show printed in PLA and PETG

lamp settings

• PLA
• .40mm nozzle
• variable layer height
• 10% gyroid infill
• outer/inner wall

connector settings (2 inner diamenter options)

• PETG
• .40mm nozzle
• variable layer height
• 15% gyroid infill
• outer/inner wall

shade settings

• PETG
• .40mm nozzle 
• .28 layer height
• 0.56 line width
• spiral vase mode

notes

• includes bambu studio 3mf files and STLs
• all photos uploaded are of the actual printed model, and are copyright protected
• if you enjoy this model please consider to buy me a coffee
• commercial licence membership available through the link below or on my patreon