---===[ UPDATES ]===---

5/7/2025: I added relief pockets into the corners of the board slots to make it a little easier to get your boards in, if the corners of the board aren't perfectly smooth (READ: if you are lazy and didn't sand them after cutting them to length, like me…).

4/7/2025: I made the opening for the boards a little larger because it was too tight in some instances - I broke a few because I had to use a mallet to get them on. 

---===[ DESCRIPTION ]===---

This is a set of interlocking, stackable legs designed to work with one (1) standard USA 1x8 board to create a tiered display. Perfect for vendor markets, home, office, or anywhere you need to maximize space. I personally use them at markets to display items vertically and make the most of my table space. You can stack them as high as needed by printing more “middle” sections. They feature a half-lap dovetail system—add glue to the joints for a strong, permanent bond if desired.

Each riser height has its own print profile, which includes a bottom, middle, top, and standalone shelf piece for that specific size. The height measurement is taken from the surface below to the top of the board it supports:

• Bottom leg: Measured from the surface it's placed on to the top of the board.
• Middle and top legs: Measured from the top of the board below to the top of the board they’re holding.

This ensures consistent spacing and easy stacking across all tiers.

You can also mix and match different board widths using my other compatible models listed below. They all work together, so you can customize your display setup to fit your needs. Be sure to check them out!

• Stackable Display Shelf Risers for 1" x 4" Boards
• Stackable Display Shelf Risers for 1" x 8" Boards
• Stackable Display Shelf Risers for 5mm x 7.75" Boards

Check out my Vendor Market Items collection for more great items that will make your life easier!