Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 106x150mm in size
You may print at higher layer heights below the Min Depth of 0.4mm
The Max Depth is 2mm and the Actual Depth is 2.1mm

Filaments Used:
    PLA Ele goo Black Transmission Distance: 0.2
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA Ele goo White Transmission Distance: 5.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Red
    At layer #13 (1.12mm) swap to Yellow
    At layer #17 (1.44mm) swap to White for the rest.