Straw Buddy- Creeper. Profiles contain 2 sizes both standard 8.5 mm straw hole size and larger 10.2 mm hole size. The holes are on the model as a negative modifier. Do not move the modifier or it will not slice the hole in the correct place.  When you slice the project, you will see the hole in place of the modifier. If you need a different size…You can change the size of the negative modifier by clicking on the transparent modifier and selecting the scale button on the top of the slicer. The 8.5mm size fits most standard straws. The 10.2 mm fits larger of the generic straws. Anything larger and you may need to adjust the size of model as well to prevent thin walls. The print profiles provided are optimal while still using a more common 0.4 nozzle. Some adjustments are made to improve quality of small details such as  top surface height. Of course, you can also use lower layer heights or use smaller nozzle for higher quality prints, but it would increase print time.

Please do not sell or give away my digital file. You may share the link to the Makerworld file. If you want to sell physical prints of my designs, I would appreciate it if you'd buy me a coffee first. Link is on my website [https://brewzr3d.com/#donate](https://brewzr3d.com/#donate)

Also,  Check us out on  [https://linktr.ee/brewzr.3d](https://linktr.ee/brewzr.3d)