3D Scanning Reference Frame Joint

🛠️ Product Description:

A connector designed for building reference frames used in 3D scanning with global marker tracking. It allows for assembling structural arms into spatial configurations. Each hole can either hold a magnet for joining parts or a plug for attaching a reflective marker.

⚙️ Technical Specifications:

• Magnet hole diameter: 10 mm, depth 3 mm
• Compatible magnets: Neodymium disc magnets 10×3 mm (recommended grade N35–N52)
• Recommended printing materials: PLA, PETG, ABS
• Plugs: Optional inserts used instead of magnets; serve as a mounting point for reflective markers
• Printing orientation: Flat surface down, layer height 0.2 mm or finer

🧲 Magnet Placement and Orientation:

Magnets must be glued in with consistent polarity so that opposite parts attract each other. Always check the magnetic poles before gluing using a test magnet.

📌 Plugs and Reflective Markers:

Instead of a magnet, a plug can be inserted into the hole and used as a base for sticking a reflective marker. Plugs are simply pressed into place without tools.

🔧 Scanner Compatibility:

Compatible with 3D scanners that support external marker tracking:

• Revopoint – Miraco, Mini, Range, Inspire, Metrox
• Creality – CR-Scan Lizard, Ferret, Ferret Pro
• Shining 3D
• 3DMakerpro
• Aoralscan
• and other optical 3D scanners supporting global marker tracking
   

[https://makerworld.com/en/models/716659#profileId-647466](https://makerworld.com/en/models/716659#profileId-647466)
[https://makerworld.com/en/models/716732#profileId-647553](https://makerworld.com/en/models/716732#profileId-647553)
[https://makerworld.com/en/models/733324#profileId-665027](https://makerworld.com/en/models/733324#profileId-665027)
[https://makerworld.com/en/models/733233#profileId-664945](https://makerworld.com/en/models/733233#profileId-664945)