New Japanese themes bookmark.

This time you hare wielding your katana ready to strike your enemies.

The model comes with 4 holes in the corners and cord hole in the top part. Feel free to remove and or play with them as you see fit.

As usual you can scale on X&Y axis but do not scale on Z to not mess up layers and color changes.

If you do resize please remember to uncheck uniform scale in the interface to avoid problems.

Switch middel color for different highlights!

Print Instructions

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 40.08x150mm in size
You may print at higher layer heights below the Min Depth of 0.96mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:
    PLA JAYO Black Transmission Distance: 0.3
    PLA BambuLab Basic Purple Transmission Distance: 5
    PLA JAYO White Transmission Distance: 7.2
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to Purple
    At layer #16 (1.36mm) swap to White for the rest.