Small Pet Cage Ledge/Platform

I printed this in ELEG00 rapid Petg, please keep this in mind when using my print profile.

Bolt holes are to be inserted from the inside, will fit a 1/4" x 1" hex bolt perfectly. The thread hole is 7mm so anything larger than that can be used to hold the ledge in place.

For my metric users, the bolt i used was an 11mm diameter hexnut(Diameter of the actual hexagon) the thread has a diameter of 6.15mm if converted.

If you run into any trouble with this print, please reach out to me first before rating the profile and I can assist with the print issue.

This print has been optimized in a way that does not require supports if printed in the orientation on the designer 3mf

I will list what i believe will not be a perfect fit but will work in the maker supply links below if you do not feel like making a trip to menards, homedepot, or lowes.

Descrição