A classic sailboat patterned bookmark, printed with four colours in HueForge.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 64.04x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Basic Silver Transmission Distance: 0.5
    PLA Eureka Ghost White Transmission Distance: 3
This print uses 4 unique filaments

Swap Instructions:
    Start with Blue
    At layer #7 (0.64mm) swap to Yellow
    At layer #16 (1.36mm) swap to Silver
    At layer #17 (1.44mm) swap to Ghost White for the rest.