Wolf Bookmark is a 2x6 bookmark with a hole in the top for a tassle.

If you like this model or any others please give me a like and follow and as always boosts are greatly appreciated.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 2x6 in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
    PLA BambuLab Tough Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Gray Transmission Distance: 2
    PLA BambuLab Matte Ivory White Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #14 (1.2mm) swap to Gray
    At layer #16 (1.36mm) swap to Ivory White for the rest.