Convert your leftover Bambu reusable cardboard spool into a fun desk decoration, Version 2!

Features:

• Simple Assembly
• No Supports Required
• Both AMS and Non-AMS Options
  • Non-AMS Parts feature press-fit parts; No glue required
  • Press-fit parts are designed to require a moderate amount of force to snap into place

Version 2 now features customizable and interchangeable parts!

• Get creative mix and matching your choice of a Dial Face, Collar, Nameplate and Stand
• Dial Face and Collar feature a screw-on design that interface with each other
• Dial Faces feature a spring and sprocket system such that the dial arrow sets to the correct location with a satisfying click

Print and Assembly Instructions:

1. Download the 3mf files for each component and select which part to print with your dial indicator.
2. Assemble the dial face.
   1. If you selected the Non-AMS option, insert all press-fit components first.
   2. Insert the spring into the rectangular slot on the back of the dial. The correct orientation will fit snugly into the spring cavity, and the knob should align at 3 o'clock.
   3. Insert the dial arrow into the hexagon hole, aligning the curved prongs with the curved recesses inside the hole. You should hear a ‘snap!’
3. Screw the dial face to the collar of your choice. The notch on the dial face shall line up with the thick rectangle protrusion of the collar for a snug, but not over-tightened fit.
4. Press the collar into the cardboard spool by aligning the rectangular cutout of the spool with the rectangular protrusion on the collar.
5. Slide both the stand and nameplate into the other side of the cardboard spool.
6. Show off your new, personalized Decorative Dial Indicator to your friends, colleagues and/or coworkers!

Don't see a style you like or have a suggestion for a component? Leave a comment and I'll consider modeling it! Get creative, have fun, and splash your personality with that spare cardboard spool you usually toss!