Partlist:

- Chassy and the printed parts Filament PLA: ICE galvanized grey, ICE gentley grey, Colored

- Raspberry Pi Zero / Zero 2 Raspberry Pi Zero 2 W (with full power)

- Display with driver board ePathChina 3,5“ TFT for example

- Battery ULEFULL 10000 Power Bank

- Amplifier 2x3W Dual Channel Audio

- Charging board MakerHawk loading board

- Micro USB port (female)

- Micro USP port (male)

- Speaker (20mm) POPESQ 20mm 8ohm 0.1W Speaker

- Power Switch 9x3x3 mm switch

- 12 DipSwitches RAFI 100.503 dip switch

- 2x straight pins (2.5mm x 14mm) You also can use a nail

- Display glass

- MicroSD Card

- Fiberglass whire 1mm square

- colored whires AWG 30 for Buttons, Power and display maybe AWG 24-26

- different screws

- rubber grommet

Instructions: 

If you are interested in our OS, contact me :)