Modular model rocket for A/B/C rocket motors. Weighs ≤58g, depending if you print the body tube (not recommended). You will need a parachute, shock cord and some glue. NO SCREWS!

This rocket is designed to be easy to customize and prototype. The fins can hot swap, you just need to unscrew the old fins and screw the new fins on. Also, you can customize the length and width of the rocket, too.

It is recommended to NOT print plate 2, the body tube but rather but one with a outside diameter of 26mm, and inside of 25mm, like this. I have had success using printed body tubes though.

I recommend using B4-5 or C6-8 engines, use A class only for wind tests.