If you have the setup, try the multi-filament option I just uploaded!

This is my first ever 3D model! I wanted to try making a different version of the flight risers I've seen, and this is what I came up with.

It's pretty simple, you just spin the ring to indicate what height the mini is at (the lines are to indicate 5 feet increments).

I've tweaked it a few times to make for a better fit after printing, but let me know if you have any difficulties, and I'll see about adjusting things.

Because this prints flat and is only 3mm thick, it should print quite quickly! I printed it back when I still used an Ender 3, and I never had any issues.

Pro-tip: If you want to color in the numbers by hand, there's a good chance that there will be some capillary action/bleeding (as seen in the photo). If you use a primer of some kind, you should be able to prevent this. At some point, I might update it for multi-color prints.

TinkerCAD link if you want to change things: [https://www.tinkercad.com/things/9JaWP4cJQid](https://www.tinkercad.com/things/9JaWP4cJQid)