Python Enclosure M14 Plug for dual PC4-M10

Remixed M14 plug/port for the back of the Python enclosure to mount dual PC4-M10 fittings (Inside and outside the enclosure)

This is so you can have one PTFE tube going from the AMS to the fitting on the inside. Then another PTFE tube from the outside of the enclosure to the printer.

Update April 8 2025:

Added a version with extra thread clearance if you find that the threads are a bit too tight.

It is available by clicking on “Download STL/CAD Files”, and I´ve also added it to a plate in the print profile.

Assemble

• Mount a PTFE tube to the ams sticking out through the hole for the plug at the back of the enclosure.
• Cut the PTFE tube flush to the outside of the enclosure.
• Screw a PC4-M10 into the inside (threaded) part of the plug.
• Screw the plug to the enclosure guiding the PTFE from the ams to the PC4-M10 fitting.
• Screw a PC4-M10 fitting to the outside of the plug.
• Push the PTFE tube going to the printer all the way in to the outside PC4-M10 so that it bottoms out against the PTFE from the AMS.