Don’t fear the Hexagon! Have you needed a more natural awesome wall decoration, without the unsightly hexagons everywhere! Welcome to the most excellent world of designer circles! Here you can help recycle and save the planet while totally decorating your walls in any style you want! This project is centered around minimal use of printed materials, while reusing the cardboard spool parts. However I have included a printable spool model for temporary use, or for during your design work you need an extra spool center. I have tried to model quite a few different types of covers to get you started on your decoration journey, but I include in the print project, and as two fusion 360 models a base cover that you can easily just add your own design to. The connectors are designed to allow you freedom to connect at many angles while still providing moderately strong connectivity between spools.

The longer hardware both the dual connector and the single mount are to be used to help mount on the wall. They should slide into the wall mount snugly after it is mounted. There is a little wiggle room side to side to make it easier to mount on wall. All connecting hardware parts have cutouts for Led strips. I was able to run a larger outdoor led strip through with no issues. No supports are needed to print anything.

This primary profile has been sliced with only 2 walls and 8% infill, which should be strong enough if your not trying to hang heavy objects from it, and you sprinkle a couple wall mounts though your custom layout.

Used the Arachne engine for the first time with this project as two of the covers have lines so small they disappear after slicing using the classic.