Update: the first custom pad for this little stool is finally available and it's the tic-tac-toe game! [https://makerworld.com/en/models/1352008-game-station-tic-tac-toe](https://makerworld.com/en/models/1352008-game-station-tic-tac-toe)

I previously designed a small chair to welcome my 4-year-old daughter's friends to our home, allowing all the children to gather around a small table. You can find that initial design here on Maker World.

I soon discovered that the chair was far sturdier than I had anticipated, leading us adults to utilize it regularly over the past few months as a compact stool around the house.

Consequently, I have now developed a new version tailored for everyone’s use, both adults and children. It's a compact yet robust portable stool that minimizes the material required for printing while remaining durable even when made from basic PLA.

Several versions available:

• one "small" 200 mm size with optimized low infill but still very strong
• one "large" 240 mm size that fills almost the entire print volume and requires an entire roll of filament (to print this on P/X series you need to override the exclusion zone)
• if you have an H2D printer… you can even dare to scale the model up to 300 mm or more!

They can be piled one upon another!

I have also created a 'cushion' that rests atop the chair to elevate the seat even further. You can customize it by adding a graphic or a name!

If you appreciate this design, start printing the small chair and then remain engaged by adding this page to your Collection because more cushion styles are on the way!

A few recommendations:

• If you plan to use this chair outdoors in direct sunlight, I suggest printing it in PETG for enhanced durability.
• Clean your build plate with detergent and water prior to printing! Additionally, if possible, utilize the innovative SuperTack build plate that minimizes warping when printing large items such as this stool.
• The model has been printed and consistently tested by adults weighing up to 100kg; however, I do not have information regarding its strength at heavier weights.
• Furthermore, if you wish to expedite the printing process, I recommend using a nozzle larger than the standard size, up to 0.8 mm.
• Lastly, an important disclaimer: the uploader is not responsible for any damage or harm caused by the use of the uploaded model.