Multiboard is, in my opinion, one of the most versatile tool and general stuff organisation systems around at the moment. This is a Multiboard compatible holder for a set of five small screw drivers.

The diameter of the shaft of the screwdrivers should not be greater than 4mm (ideally 3mm) and the base of the handle that sits in the holder should be no greater than 13mm. Please check the measurements of your tools before printing. The screwdrivers that I made this for are made by Stanley.

The holder has friction fit pegs on the back to attach to the Multiboard plate. This means that you can utilise the space over the plate mounts or you can use regular Multiboard snaps fixings (not included in this model, see the Multiboard website to the most up to date models [https://www.multiboard.io](https://www.multiboard.io)).

The snap fittings that I use can be found on this page - [https://www.multiboard.io/parts-library/snaps](https://www.multiboard.io/parts-library/snaps)

I used Basic PLA with the print settings specified by the Multiboard team and detailed here - [https://docs.multibuild.io/beginner-section/printing-guidelines#default-printing-settings](https://docs.multibuild.io/beginner-section/printing-guidelines#default-printing-settings) - apparently Matte PLA is stronger but for this application I didn't see the need for the strength.