A collection of modular desk organizers that can hold all sorts of things. From glue sticks to pens & pencils, markers small and extra large, deburring tools & desoldering pumps. The holes are slightly rounded up top and taper inward near the base so that whatever you put in there doesn't rattle or droop. It also comes with an optional magnetic hexagon peg & hole base that inclines the organizer unit at a 20 degree angle, for easy access when placed around your workplace. The big base can also hold 2 smaller units, which allows for more storage on a smaller surface area. It has massively decluttered my desk.

To assemble the magnetic hexmax base use a hot glue gun and a diameter 12 x 3 mm thick magnets. Use a sparing amount of hot glue and be quick to press the magnet in. If the magnet sticks out a bit due to the glue being too thick or semi-hardened, you can use a heatgun to warm it up and press the magnet in, since the hot glue has a lower melting point, the superfluous glue will squeeze out. Remember to double check the polarity, otherwise you'll have to use the heatgun and magnets to disassemble.

The examples pictured above were printed using Bambu Matte PLA (Apple Green) on a Bambu A1 mini.