Thanks for reading carefully to make sure you understand the design intention with this 3D model.

There are  plenty of 3D files on the web for stackable shelves, but I wanted to have a tight tray to maximize my desk space and to use less plastic to print the trays, so I came up with this 3D model.  

New (2026-04-26) Side-to-side Clips are now available for users that want to create mutiple colums of stacks for a more sturdy tower. The clips are available in a sepate print profile (print supports are required for the side-to-side clips.

My design is done according to the following principles :

• limit filament usage (only 85g per basket shelf) ;
• have narrow walls (to avoid wasting “width” space and plastic) ;
• snug fit the boxes in the trays (again to avoid wasting space);
• have shallow shelves, to use less plastic and only where it's useful.  Also simplifies pulling out of the boxes ;
• be stackable (of course !) ;
• should accommodate all types of Bambu boxes (2 old types + 2 new type of boxes) (fits Ele-goo and Overture as a bonus!)
• must also fit an unboxed Bambu spool. 

The "vertical walls" of the trays must stack in each other (the last tray must have the end cover). The tray walls are solid by the interlocking action of the tray that "stacks" on top. The end cover is thicker to limit the flex.

The stackable trays are designed to hold filament boxes, so the weight on the shelves ribs (horizontal) shall be evenly distributed.

(2026-01-08) *NEW * - Now available, as many of you requested ...  little side clips to retain the baskets when stacked

[ Printing ]  No supports required.  Choose the material according to your application. I used PETG but since its indoor, PLA would be perfectly fine IMO.

Licence and terms of use :

When you download the files, you understand and agree that this content is licensed under a Standard Digital File License.

You can : 

(✔) Personal use : Download the digital file(s) for free and print 3D parts from the digital file(s) for your own use.

You cannot :

(X) Sell parts : manufactured from the digital file(s) or any derivative of the digital file(s), no matter how the parts are made, how many parts are made.  This also prohibits you from selling parts made from the Digital file(s) on sites such as eBay, Etsy, FB marketplace or any other location. 

(X) Share the digital file(s) or resell them. 

Liability disclaimer and use:

By downloading the digital file(s) and making a 3D printed derivative object from it, you agree that you're doing it at your own risk and understand the limitations of 3D printed parts.  The digital file(s) are not a product and the design do not give any express or implied warranty that, any product made from the digital file(s), will work or perform in a certain way.