Sub-Zero - Hueforge — STL Gratis

This is 3 colour Hueforge of Sub-Zero.

I uploaded two sizes 165x200 X1/P1/A1 and size 148x180 for A1 Mini.
And thicker version with no border size 165x200. Swap instructions in profile description.

Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.

If you want stand for this print check out my Simple vertical stand.
For my Hueforge pictures with border choose the version with 3 mm gap.

If you like this picture, you can look at my other Superheroes and Villains pictures here in this collection:

[https://makerworld.com/en/collections/5110349](https://makerworld.com/en/collections/5110349)

Instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Dark Gray Transmission Distance: 2.4
    PLA BambuLab Basic Jade White Transmission Distance: 4.8
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Dark Gray
    At layer #12 (1.04mm) swap to Jade White for the rest.

Descripción

Sub-Zero - Hueforge