Introducing my Kitchen and Sink Caddy set. The ultimate organisation system for your kitchen utensils, or kitchen sink cleaning essentials.

Key Features:

• 3 Different sized Containers
• 8 Different Base Options
• 2 different design styles
• Removable Dividers
• Drainage or Regular Bases

What is Included In the set:

Drainage or Regular Base:

I've designed 2 different bases for each of the 3 different sizes, and combined versions. In the picture above, the base on the right is the Drainage base design, and the base on the left is the regular base. The Drainage base is designed to be used at the sink, and the regular Base is designed to be used everywhere else.

Base Options:

• Drainage Base - Large or Sponge and Tall
• Normal Base - Large or Sponge and Tall
• Drainage Base - 2 x Large or 1 x Large, 1 x Sponge and 1 x Tall
• Normal Base - 2 x Large or 1 x Large, 1 x Sponge and 1 x Tall
• Drainage Base - Tall
• Normal Base - Tall
• Drainage Base - Sponge
• Normal Base - Sponge

Smooth or Textured Design:

Smooth:

Textured:

I've jumped on the fuzzy skin bandwagon, so I have released 2 different versions of each of the containers. THe first features smooth walls, the second features textured walls with a unique organic pattern. 

3 Different Container Sizes:

Large:

The Large Container features the removable dividers. This is perfect for cutlery organisation, dishwashing liquid, soap or if you only want 1 container on your bench.

Tall:

This is designed to hold a dishwashing brush, or as a catch all container for drying your cutlery. 

Sponge:

This is designed to allow your sponge to sit somewhere and dry efficiently.

Removable and Adjustable Dividers:

The Dividers can snap into place in 5 different locations helping to divide up the larger storage container. This snaps into place securely, but is also easy to remove if you need to change up the configuration. 

Drainage Base:

As every kitchen sink is different there wasn't a 1 size fits all to make sure the drainage base would still drain into the sink, regardless of the sink lip / edge height. My suggestion is to print a little spacer block to ensure that the drainage base remains level.

Bambu Studio Spacer Creation Instructions:

Step 1: Measure the height of your sink lip, that is the height between your sink edge, and the height of your benchtop. In my instance this was 2mm.

Step 2: Right Click in Bambu Studio and >Add primitive >Cube

Step 3: Adjust the cube dimensions to your desired dimensions and print.

If you like this model, Please consider looking at my other models. Some of them are featured below: