Story:

With the arrival of Spring, the annual cherry blossom season is upon us. My wife loves them and has been wanting to go see them. While a visit to observe them is in the future, this will just have to suffice for now. One is based on the traditional Japanese art and the other is based on a more natural setting observed at night under the moonlight.

Customize your clock. All clocks are wall mountable. The mini clock has a magnet option also. You have the options of the clock size, use of a bezel, hour color accents, clock hands, and a stand. Color them how you see fit. This section you will choose the clock face to make your clock. 

The clocks have 2 sizes, Large(246mm) and Mini(170mm), and an option with or without a Bezel. The clock face without the bezel is the full 246mm(Large) and 170mm(Mini). While the one with the bezel is 234mm(Large) and 158mm(Mini) to accommodate the difference for the 6mm bezel interface. Some faces have an added option of regular numbers and roman numerals. Pictured below are some samples.

Below are links to the clock parts for their respective sizes and the clock hands if needed:

Large: [https://makerworld.com/en/models/1220826-clock-large-wall-mount-or-with-display-stand#profileId-1237665](https://makerworld.com/en/models/1220826-clock-large-wall-mount-or-with-display-stand#profileId-1237665)

Mini: [https://makerworld.com/en/models/1220990-clock-mini-wall-mount-magnets-or-display-stand#profileId-1237871](https://makerworld.com/en/models/1220990-clock-mini-wall-mount-magnets-or-display-stand#profileId-1237871)

Clock Hands: [https://makerworld.com/en/models/1221053-clock-hands#profileId-1238638](https://makerworld.com/en/models/1221053-clock-hands#profileId-1238638)

More clock faces can be found at my Clocks Collection: [https://makerworld.com/en/collections/5469420-clocks](https://makerworld.com/en/collections/5469420-clocks)

Cherry Blossoms Mountainside Clock
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Dark Gray Transmission Distance: 1.5
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At height depth (0.8mm) swap to Dark Gray
    At height depth (0.88mm) swap to Jade White
    At height depth (1.28mm) swap to Black
    At height depth (1.36mm) swap to Red
    At height depth (1.68mm) swap to Jade White for the rest.