This is my mug stacker!

Features:

• Stack your mugs with this simple print 
• No more chipped mugs
• Use your space more effectively

Needed Tools:

• none

Needed non printed parts:

• none

Assembly:

Recommended filament: PLA

Hotend: 0,40mm

Before printing, make sure your build plate is clean and apply some adhesive. Wash the build plate with oil free soap and wipe it off with some paper towels. For build plate adhesion, apply a thin, even coat of your preferred adhesive. I repeat the process every 5-6 prints.

Bad build plate adhesion is not related to the model.

Take a look at my other models [https://makerworld.com/en/u/1597610120](https://makerworld.com/en/u/1597610120)

Please leave me a like and a decent rating if you were satisfied, thank you in advance!