This sleek and modern laptop riser is designed to elevate your workspace! 

Compatible with most 13", 14", 15", and 16" laptops. Dimensions are available below.

Features

• Its tilted design improves viewing angles and reduces strain on the neck and wrists, making long hours of use more comfortable. 
• The raised structure creates additional usable space beneath the laptop, perfect for organising accessories or improving airflow for cooling. 

• The stand also features connection pieces that securely link both supports, ensuring stability for your laptop.

   

Assembly

• Print all 3 plates, and the last one (connector) twice.

• To attach the connectors, glue is optional. The tolerances should be tight enough to hold the stand together.

   

  Dimensions - 13" & 14"

  The top surface of the riser has a length of 190mm (excluding the rounded surface), and it can support 20 - 22cm wide laptops, which should be enough for most 13" - 14" models.    The connection piece has a length of 217mm as it was the largest that I could fit on my A1 Mini's buildplate. This should be fine for most laptops, but .STEP files are available for you to lengthen if needed.   Both left and right stands have a width of 25mm.   The tip of the riser is raised 50mm above the ground.

   

  Dimensions - 15" & 16"

  The top surface of the riser has a length of 243mm (excluding the rounded surface), and it can support 25 - 27 cm wide laptops, which should be enough for most 15" - 16" models.    The connection piece has a length of 285mm. This should be fine for most laptops, but .STEP files are available for you to lengthen if needed.   Both left and right stands have a width of 25mm.   The tip of the riser is raised 50mm above the ground.

   

  changelog

  23/3/25 - Updated Connector pieces for 15" & 16" profile from 270mm to 285mm

check out my other designs!