Easy to print sign

It doesn't matter if you use it to decorate on that day or throughout the month, it will look good in any corner of your home

As usual, it is designed to fit any mid size printer, each color is separated file so you can print it without a multicolor system or separated plates for minimize filament changes.

you can customize it by selecting your personal detail elements or even none:

• basquet
• carrot
• marshmallow
• bunny ears

Just add a filament change at height or paint it direct from the slicer

Print profile here in makerworld has all the colors, but you can print all buildplates with 4 colors each.

Print Settings

Material: PLA / PETG

Layer height: 0,20 mm

Nozzle diameter: 0,4mm or 0,6mm

Infill: 10-12%

Perimeters: 2

Supports: no

Printing Tip

the tolerances are a little tight, so make sure you don't have "elephant foot” in your printer to get them to fit right. if you can't avoid it then you just have to scrape or sand the base of each piece a little to make it fit. And if they are a little loose, use some glue to hold them.

You can see my other models here:

Diego Alvarez | Published - MakerWorld

________________________

If you like my designs and want to sell physical prints or support me , you can check out my patreon for commercial license and exclusive models

[https://www.patreon.com/meafdesigns](https://www.patreon.com/meafdesigns)

________________________