Ghastly Evolutions | LED Display — STL Grátis

This piece is intended to be mounted to the wall

Both print profiles are 4 colored prints. One with Bambu Lab Purple PLA, the other with Polylite Natural PLA.

Light Installation

Put aluminum (shiny side up) at the bottom of the baseplate, adhere with glue.
(Skip if you don't plan on using a grommet for the wire hole) Get a 16mm Closed Grommet, cut a thin line down the middle, but don't cut it entirely in half.
Insert led strip, install along the walls of the print, cut to size.
(Personal preference to ensure longevity of adhesive) Hot glue along the lines of the led strip, grommet hole
Insert faceplate.
Sip on a nice cold beer and admire your handiwork.

**I highly recommend turning retraction settings on if you haven't already. Its a vital setting to have on for these light displays. It helps eliminate the chances of blobs or stringing.

Ghastly Evolutions | LED Display