I hope you like it Please put a like it's always a pleasure and follow me, sharing your prints and give me a boost 🙏

Mitsubishi Evolution V Hueforge

Details & Size

The Model is 220x181mm in size

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.1mm and the Actual Depth is 2.1mm

Filaments Used:

PLA Elegoo Black Transmission Distance: 0.1

PLA Elegoo Grey Transmission 2.2

PLA Elegoo White Transmission Distance: 5.5

PLA Elegoo Red Transmission Distance: 4.3

Swap Instructions:

Start with Black

At layer #9 (0.8mm) swap to Grey

At layer #11 (0.96mm) swap to White

At layer #15 (1.28mm) swap to Red

All my colours used are Elegoo, different from the ones in the instruction document but you can use any colour you wish, they can be changed totally up to you and how you would like the design to come out.