SD card reader and holder, for the ICY BOX IB-869a. Holds up to 8 sd cards and 6 micro sd cards, in the outer shell there is a place to store the cable, and one free for usb cards, sim ejector….

Installation

1. Unscrew the 2 screws of one side of the card reader
2. Place the card reader inside the print (align holes with the holes on the print and be careful that the top plate is still aligned with the sd card readers)
3. Screw the 2 screws from before in the 2 new holes
4. Glue the magnets on the outer shell and the inner shell(!!Polarity), if the printer is precise you won't need to glue them.